caledonian cables ltd

Offshore & Marine Ca(1)

Showing 11 - 20 of 41, total 5 pages [First] [Previous] [Next] [Last]

ul standard indutrial cables-epr/hyp, medium-volta
Specification: UL Standard
Detail: These cables are used in these applications: pulp and paper mills, petrochemical plants, sewage treatment facilities, water treatment plants, steel mills, textile mills, utility power generating stations, scrubbers and other...

re-2x(c)y 90°c / 300v
Specification: EN 50288-7
Detail: For transmission of analogue and digital signals in instrument and control systems; allowed for use in zone 1 and zone 2, group II, classified areas (IEC 79-14), not allowed for direct connection to low impedance sources, e....

type a1, a2 & a3 railway signalling cable
Specification: NR/PS/SIG/00005(formerly RT/E/PS/00005)
Detail: The cables are designed for railway signalling systems. The cables are suitable for use in d.c. circuits where the nominal voltage to earth does not exceed 1100 volts and are suitable for installation in ducts.

xlpe insulated, lsoh (shf1) sheathed flame retarda
Specification: IEC 60092 Standard
Detail: These unarmoured power & control cables are used on board of ships in all locations for fixed installations not subject to mechanical risk complying with IEC standards 60092-352. These cables are flame retardant, low smoke & h...

firerol standard wall single core unsheathed cable
Specification: EN 50264
Detail: -Used as power and control cable for protected installations inside and outside of rail and transport vehicles, where handling andinstallation cost are an important factor. -Used in control, auxillary and main circuit wiring ...

german standard (vde) mining cable h07rn-f/a07rn-
Specification: DIN VDE 0282 Part1 and Part 4HD 22.1HD 22.4
Detail: These cables are designed for the connection of heating units, industrial tools, mobile equipment and machines, e.g. vulcanisation plates, hand-operated equipment, transportable motors etc., under normal mechanical loads in dr...

iec 60092 standard cat 5e f/utp 24awg
Specification: EN 50288ISO 11801IEC 61156-5IEC 60332-1IEC 60754-1/2IEC 61034
Detail: These Cat5e F/UTP cables are manufactured in accordance with IEC 61156-5 requirements, can support all Class D applications like Ethernet, Fast Ethernet, Gigabit Ethernet, suitable for basic voice and data installations up to ...

multi-core automotive cables-flyy
Specification: ISO 6722
Detail: This PVC insulated, PVC sheathed low tension multi-cores cable is used for automobiles, motorcycles and other motor vehicles.

p2 or p2/p9 rfou/tfou 3.6/6kv
Specification: NEK606 Standard
Detail: These cables are flame retardant, low smoke, halogen free and mud resistant, used for fixed installation for medium voltage power.

single core cables to bs 6622/bs 7835
Specification: BS 6622 BS7832
Detail: The single core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.8/6.6KV to 19/33KV and frequency 50Hz. They are suitable for installation mostly in power supply stations, indo...


Showing 11 - 20 of 41, total 5 pages [First] [Previous] [Next] [Last]
1 2 3 4 5